Відео

thats my only nozzle for over a year now ... :) the 1.0 cht volcano... vez, if you haven't seen it yet,check the diamondback revo :O

Can I hook it up to my Octopus PRO v1.1 motherboard and control it with the settings selected in the slicer?

@13:42 ua-cam.com/video/6ooswxjh3HA/v-deo.html

thanks for the video. Incidentally, the software has only been called Fusion for a few months now, no longer Fusion 360 😉

Hello everyone. I'm here to ask for advice. I've been using Fusion 360 and I really like what I've learned so far, but I'm realizing that my MacBook M1 with 8GB of RAM isn't enough. My question is, will any laptop with 16GB of RAM be sufficient? Thanks 🙏🏼

Nice!👌🏻

I had no idea you could do this.

Great video Vez! I've been creating lighting in my renders for ages because they have never made fusion very good at rendering. Not like Octane or anything close. But creating lights is a very good way to add lighting where you need it instead of relying on overall area lighting.

Great video as always!

second comment!

First like👍 🎉😊

Meet the jetsons…anybody else hear that playing when it starts printing?

that extruder gear is GOING

Do you sell full kits yet?

Hey simon. I am ordering a 330 kit. Is it possible to order with water cooling and aluminium gantry? I don't know what are the other upgrades i think that is it.

i can extrude 85A with up to 8mm^3/s on my BL X1C. It's just not useful unless you have a model with no overhangs.

Another filament classic

Hi Vez. Any chance that mellow can be convinced to release the aluminium lower z bearing mounts and z motor mount as a s separate, standalone bundle?

I follow the alien press link and it's very hard to understand how to buy. Not sure how to identify if it comes with helical gears or how many tooth motor. I see 8t/10t and it discourages purchase because I don't know what I will get

My printer: i cant print pla in 300mm/s 😭 Also this guy:

Me when someone spilled coke on the table

i wonder what those non-trinamic drivers would do like the SL2690A's, probably would be way louder and less great to use but 90V bro 😂 i wonder when theres gonna be a 100V Trinamic driver, and what those could do lmao

Ooh, shiny new stuff :O Will the kits be updated with these new parts once they land?

Love the knolling in the thumbnail!

Start of project: We try to make good DiY printer from TronXY! Today: Now we installing parts from Rols-Royce, NASA rocket and last Mac pro...

not yet used fully sized drivers for cnc machines/robots?

Should we install these drivers directly on motors?

Please do not take this as a criticism just facts. 60V is dangerous voltage please do not emphasize such product for DIY. Obviously in China INSUCO regulations are not a concern. 60V DC and 30V AC is not touchable for humans, its lethal...Obviously 48V and 60V supply will generate at the motor phase that amount of AC voltage which is above the 30Vac limit which is considered safe. Secondly heat is not transferred differently due to higher voltage, Its the same, components are having thermal design requirements, glad that this information arrived to some Chinese manufactures as well :). Hope these products are coming with CE, FCC, UK certification including INSUCO testing (I doubt that since I do not see those projection features in the pictures) otherwise they are pretty illegal. For those do not understand what INSUCO means is insulation coordination - which basically means design measures to avoid injuries / death by electric shock.

make your own backplate with the cnc haha

mellow is the worst aliexpress 3d printing manufacturer

I am very impressed. I am subscribed to several 3D printing channels, and you are the one who has pushed your 3D printer to the limit.

would love solder pads as well as/instead of screw terminals tbh

Any eta on filament sensor availability? I need that asap

obviously the drivers are isolated from the 3D printer board right?? because you can't send 48 or 60 volts through the 3D printer motherboard

Vez, is it possible to compare the new Flsun S1? would really like to see what upgrades you could add to improve its insane speed. the only printer that might give you a challenge. Not lol. I'm sure within a year or 1.5 years flsun will make a 2400mm/s printer, they always double there speed on next printer made. Currently the flsun S1 is being held back, it limited to the limits in the firmware, max movement speed is 1600mm/sec but it can move even faster as its very stable at the 1600mm/sec movement speeds.

why not just use an industrial motor driver

Looks great! I love that we can all have access to well made aluminium parts at a very reasonable price thanks to the popularity of the high end DIY printers and all the work that has been put into the designs. Does the slot for the top bearing on the motor mounts not defeat the purpose of having it there though? If the bearing can move its not supporting against the tension? I get that the slots need to be there because the motor has to move for tensioning adjustment, but isn't that just a fundamental downside of using motors to tension instead of separate tensioners.

Thanks Vez for all the work on the printer, currently building the vz330... That filament sensor will be usefull to setup an MMU, I was looking into an extruder that would be able to achieve that capability in the future. I really enjoy the work that the Mellow team is performing on their product lines, very interesting ideas coming up and i really do appreciate the openness shown on your discord to ideas to improve their products

60V at 6A.... thats like 2hp with a awd setup..... wild

And I just got my 5160 pro V1.5 🥹🥹🥹🥹

Excited for these new parts! Your videos have inspired me to go AWD on my Voron, currently assembling the new gantry (going with Monolith + LDO Superpower motors). For the drivers, I got a very good deal on the TMC5160T Plus (the big ones) from BTT. The new Mellow drivers look very similar in terms of specs, but more compact and with some added bells and whistles. Any opinion on how these two compare?

9mm belts mod when? 👀👀

That driver looks sexy. Looks like an RC Electronic Speed Controller.

Why only 60v? There are Leadshine drivers capable of 110VDC or 80VAC.

want to test with the kraken cant wait

Why not design it with the second motor upside down and use regular shafts? This is how the voron guys do it. It will be even less tension on the motor that way because the pulley is closer to the motor and you can tension belts to gates specs achieving a lot more accels.

I’d love a printed solution for the 330 for the bearing. I like higher tension and think stability and rigidity it can help with prints overall.

awesome goodies for sure

Awesome man! So glad to see new parts coming for the VZBoTs. Albeit it costs me a foutune owning 3 so I have to upgrade all 3 every time something drops. Lol I have also been developing some new parts for the VZBoTs in the way of aluminum parts. I don't have the ability per se to develop electronics but I can repair them. That said I'd like to drop some of my ideas and CAD files by you sometime Vez. I think you may like them. As always great to see you posting new stuff! Keep up the great work Mellow/Team Gloomy and the VZBoT Team!!

It's great to know the Kraken can be tested with those .